|
Installing Reese rails in '08 6.5 bed
Hi all,
I just finished installing a set of Reese rails for a 5th rail hitch in my '08 Tundra. The installation went pretty smooth, with 2 minor exceptions:
The "bed spacers" that reese provides to go between the rails and the bed floor seemed too thin---and the hitch pin measurement is considerably different then what Reese said, they listed "3 1/2 inches" in front of axle, where I am measuring about 6 inches in front of axle.
Because the rest of the rail mounting went as the directions described, I am assuming the reese instructions are wrong for the hitch pin measurement, or else I am just measuring wrong---
Anyone else notice this?
|