[guapo]

I took my truck in today to have them check my alternator to see if it was working correctly. Since we all have guages, where does you needle sit on the guage when it is running, mine is just to the left of the center. I was thinking it was not working. Since I turned on all the stuff in the truck and the needle did not go towards the +. The dealer said it was working right.

On the other note: I asked the service tech if they could turn on the alarm. He did it for free. He said this would give him time to play with one of the new tundra's. He explained that when you double click the key fob the little red truck light with the key in it would glow steady red for 14 seconds. It would then start to flash. This tells you that the alarm is actviated. To test turn it on with a window open and the key out of the ignition. Then reach in and open the door thru the window, the horn will start and the lights will flash.