View Single Post
Old 01-05-2008, 12:39 PM   #5 (permalink)
Rev411
Member
 
Rev411's Avatar
 
Join Date: Dec 2007
Location: Clayton, NC
Posts: 71
Before and After Leveling Kit

The following pictures show the factory rake of the truck to be about 2.5" difference from the rear to the front on the before shots. I measured my truck on a level surface and the rear distance between the top of my 18" rims to the bottom of the fender flare is 14 and 7/8" while the front space between the top of the rims to the bottom of the fender flare was 11 and 1/4". After the lift, the front height change to 13 and 3/8" giving it more of a level stance and now I can actually side under the front of the truck. The top gun kit did what it claimed it would do. Clearly, it was money well spent.

The first three pictures are before the lift and the last two are after the lift. Hope this helps.
Attached Images
File Type: jpg Before Lift Front View II.jpg (163.7 KB, 42 views)
File Type: jpg Before Pass Side.jpg (161.5 KB, 45 views)
File Type: jpg Before Lift Pass Side.jpg (155.0 KB, 80 views)
File Type: jpg After Lift Dr Side.jpg (171.8 KB, 94 views)
File Type: jpg My Tundra.jpg (167.4 KB, 26 views)
__________________
2007 DC Tundra 2WD, 5.7L
Doug Thorley Headers
Corsa Exhaust
Rev411 is offline   Reply With Quote