|
Hitch Reciever/Draw Bar rattle is common in a lot of trucks. Also, the draw bar can vary in size from 1/16" to upto 1/4"; even the same draw bar model from the same company.
The fastest and easiest solution: Buy some gutter tin, right angle material at Home Depot (about $1-$2), and use that as a "fitting shim" on one or two sides of the draw bar. It will fit as snug as a bug in a rug.
I have had to use that on all my F150's and F250's, and it works great. You can epoxy the shim to the side of the draw bar if you want; but be careful, it could be too tight.
|