|
PS- for those of you who want to roll your own sonar kits-
With the 8 sensor kit, I routed the front wires around to the passenger side, up around the washer fluid reservoir, and into a grommet on the firewall next to the ECU.
I used one of the plugs next to the AUX connector- I cut it up and made a power switch so I can turn it on and off as I want (not slaved to reverse).
The rear sensors can be routed through a grommet under the rear tray on the RCSB, I'm sure on the DC and CM there is somewhere similar to do it.
The controller unit is sitting under that tray too.
-Dave
|